SMP COMMERCE IMPORT-EXPORT CO.,LTD
T2 Road, Ban NaKham, Sikhottabong District, Vientiane Capital, Lao PDR
Tel: +85621 264499 Fax: +85621 264849. Mobile: +85620 55507012, 99907012, 23333380, 22229991
Website: www.smppipe.com; Email: vixienesmp@gmail.com
The properties of u.PVC pipe
u.PVC pipe are used more with every passing day because of its advantages.It replace steel pipe, cat iron pipe,sement pipe...
- Light and easy to transport.
- Smood suface both inside and outside,small friction factor.
- Hight pressure resistance.
- Easy to install exactly and and waterproof.
- Hight mechanical and impact strength.
- Long life (not less than 50 years if used correctly).
- Economy (low cost than other pipe).
- Hight chemical resistance (resistance to acids,alkalis,salts at 45 o C).
Note:
Not to use u.PVC pipe continuonsly at the following condition:
- Temperature is higher than 45 o C.
- Under u.PVC rays or sunshine.
Diameter(mm)
DN.(mm)Outside Diameter l
(mm)PN 4
e
(mm)PN 5
e
(mm)PN 6
e
(mm)PN 8
e
(mm)21 21.0 + 0.3 32 - - - - 27 26.4 + 0.2 32 - - - - 34 34.0 -0.3 34 - - - 1.3 +0.3 42 42.0 + 0.2 42 - - 1.5 +0.3 1.7 +0.3 48 48.2 + 0.2 60 - - 1.6 +0.3 1.9 +0.4 60 60.0 -0.3 60 - 1.5 +0.3 1.8 +0.4 2.3 +0.4 75 75.0 +0.3 70 - 1.85 +0.3 2.2 + 0.4 2.9 +0.5 90 90.0 +0.3 79 1.9 +0.3 2.2 +0.4 2.7 +0.5 3.5 +0.6 110 110.0 +0.3 91 2.2 +0.4 2.7 +0.5 3.2 +0.5 4.2 +0.6 125 125.0 +0.4 100 2.5 +0.5 3.1 +0.6 3.7 +0.6 4.8 +0.7 140 140.0 +0.5 109 2.8 +0.5 3.5 +0.6 4.1 +0.6 5.4 +0.7 160 160.0 +0.5 121 3.2 +0.5 4.0 +0.6 4.7 +0.7 6.2 +0.8 180 180.0 +0.6 133 3.6 +0.6 4.4 +0.6 5.3 +0.7 6.9 +0.9 200 200.0 +0.6 145 3.9 +0.6 4.9 +0.7 5.9 +0.8 7.7 +1.0 225 225.0 +0.7 160 4.4 +0.6 5.5 +0.8 6.6 +0.9 8.6 +1.1 250 250.0 +0.8 175 4.9 +0.7 6.2 +0.8 7.3 +0.9 9.6 +1.2 280 280.0 +0.9 193 5.5 +0.8 6.9 +0.9 8.2 +1.0 10.7 +1.3 315 315.0 +1.0 214 6.2 +0.8 7.7 +1.0 9.2 +1.1 12.1 +1.4 355 355.0 +1.1 238 7.0 +0.9 8.7 +1.1 10.4 +1.2 13.6 +1.6 400 400.0 +1.2 265 7.8 +1.0 9.8 +1.2 11.7 +1.4 15.3 +1.7 450 450.0 +1.4 295 8.8 +1.1 11.0 +1.3 13.2 +1.5 17.2 +1.9 500 500.0 +1.5 325 9.8 +1.2 12.3 +1.4 - -
- Manufactured in accordance with ISO 4422:1996 (TCVN 6151:2002)
- L: The standard length of pipe 4000 +10 mm
- e: Wall thickness
- l : The length of sockets
- PN : Nominal Pressure (Bar) (1Bar = 0.98 Kg/cm2)
- The length and wall thickness of pipe can be changed to meet customer's demand
- Sockets manufactured in accordance with DIN 19532
Diameter(mm)
DN.(mm)Outside Diameter - d(mm) l
(mm)PN 10
e
(mm)PN 12.5
e
(mm)PN 16
e
(mm)PN 25
e
(mm)21 21.0 + 0.3 32 1.20 +0.3 1.5 +0.3 1.6 +0.4 2.4 +0.4 27 26.4 + 0.2 32 1.3 +0.3 1.6 +0.3 2.0 +0.4 3.0 +0.5 34 34.0 -0.3 34 1.7 +0.3 2.0 +0.4 2.6 +0.4 3.8 +0.6 42 42.0 + 0.2 42 2.0 +0.4 2.5 +0.5 3.2 +0.5 4.7 +0.7 48 48.2 + 0.2 60 2.3 +0.4 2.9 +0.5 3.6 +0.6 5.4 +08 60 60.0 -0.3 60 2.9 +0.5 3.6 +0.6 4.5 +0.7 4.5 +0.7 75 75.0 +0.3 70 4.5 +0.7 5.5 +0.8 5.6 +0.8 5.6 +0.8 90 90.0 +0.3 79 5.4 +0.7 6.6 +0.9 6.7 +0.9 6.7 +0.9 110 110.0 +0.3 91 5.3 +0.7 6.6 +0.9 8.1 +1.0 12.3 +1.4 125 125.0 +0.4 100 6.0 +0.8 7.4 +0.9 9.2 +1.1 14.0 +1.6 140 140.0 +0.5 109 6.7 +0.9 8.3 +1.0 10.3 +1.2 15.7 +1.8 160 160.0 +0.5 121 7.7 +1.0 9.5 +1.2 11.8 +1.4 17.9 +2.0 180 180.0 +0.6 133 8.6 +1.1 10.7 +1.3 13.3 +1.5 - 200 200.0 +0.6 145 9.6 +1.2 11.9 +1.4 14.7 +1.7 - 225 225.0 +0.7 160 10.8 +1.3 13.4 +1.5 16.6 +1.9 - 250 250.0 +0.8 175 11.9 +1.4 14.8 +1.7 18.4 +2.0 - 280 280.0 +0.9 193 13.4 +1.6 16.6 +1.9 20.6 +2.3 - 315 315.0 +1.0 214 15.0 +1.7 18.7 +2.1 23.2 +2.5 - 355 355.0 +1.1 238 16.9 +1.9 21.1 +2.3 26.1 +2.9 - 400 400.0 +1.2 265 19.1 +2.1 23.7 +2.6 29.4 +3.1 - 450 450.0 +1.4 295 21.5 +2.4 - - -
Diameter(mm)
DN.(mm)l
(mm)PN 5
e
(mm)PN 6
e
(mm)PN 8
e
(mm)PN 10
e
(mm)PN 12.5
e
(mm)PN 16
e
(mm)63 104.2 1.6 +0.4 1.9 +0.4 2.4 +0.4 3.0 +0.5 3.8 +0.6 4.7 +0.7 75 111.2 1.9 +0.4 2.2 +0.4 2.9 +0.5 3.6 +0.6 4.5 +0.7 5.5 +0.8 90 116.1 2.2 +0.4 2.7 +0.5 3.5 +0.6 4.3 +0.6 5.4 +0.7 6.6 +0.9 110 122.9 2.7 +0.5 3.2 +0.5 4.2 +0.6 5.3 +0.7 6.6 +0.9 8.1 +1.0 125 128.1 3.1 +0.5 3.7 +0.6 4.9 +0.7 6.0 +0.8 7.4 +0.9 9.2 +1.1 140 132.5 3.5 +0.6 4.1 +0.6 5.4 +0.7 6.7 +0.9 8.3 +1.0 10.3 +1.2 160 104.2 4.0 +0.6 4.7 +0.7 6.2 +0.8 7.7 +1.0 9.5 +1.2 11.8 +1.4 180 146.1 4.4 +0.7 5.3 +0.7 6.9 +0.9 8.6 +1.1 10.7 +1.3 13.3 +1.5 200 152.0 4.9 +0.7 5.9 +0.8 7.7 +1.0 9.6 +1.2 11.9 +1.4 14.7 +1.7 225 161.1 5.5 +0.8 6.6 +0.9 8.6 +1.1 10.8 +1.3 13.4 +1.5 16.6 +1.9 250 168.5 6.2 +0.8 7.3 +0.9 9.6 +1.2 11.9 +1.4 14.8 +1.7 18.4 +2.0 280 181.4 6.9 +0.9 8.2 +1.0 10.7 +1.3 13.4 +1.5 16.6 +1.9 20.6 +2.3 315 192.2 7.7 +1.0 9.2 +1.1 12.1 +1.4 15.0 +1.7 18.7 +2.1 23.2 +2.5 355 206.4 8.7 +1.1 10.4 +1.2 13.6 +1.6 16.9 +1.9 21.1 +2.3 26.1 +2.8 400 220.0 9.8 +1.2 11.7 +1.4 15.3 +1.7 19.1 +2.1 23.7 +2.6 29.4 +3.1 450 235.0 11.0 +1.2 13.2 +1.5 17.2 +1.9 21.5 +2.4 500 255.0 12.3 +1.4
DN OD Length PN5 PN8,5 PN13,5 18 22 + 0.15 4000 - 2.0 + 0.20 2,5 + 0.20 20 26 + 0.15 4000 - 2.0 + 0.20 2,5 + 0.20 25 34 + 0.15 4000 - 2.0 + 0.20 3,0 + 0.25 32 42 + 0.15 4000 1,5 + 0.15 2.0 + 0.20 3,1 + 0.25 40 48 + 0.15 4000 1,5 + 0.15 2,3 + 0.20 3,5 + 0.25 50 60 + 0.15 4000 1,8 + 0.20 2,9 + 0.25 4,3 + 0.30 65 76 + 0.20 4000 2,2 + 0.20 3,5 + 0.25 5,4 + 0.35 80 89 + 0.20 4000 2,5 + 0.20 4,1 + 0.30 6,4 + 0.40 100 114 + 0.30 4000 3,2 + 0.25 5,2 + 0.35 8,1 + 0.50 125 140 + 0.30 4000 3,9 + 0.30 6,4 + 0.40 9,9 + 0.55 150 165 + 0.40 4000 4,6 + 0.30 7,5 + 0.45 11,7 + 0.65 200 216 + 0.50 4000 5,4 + 0.35 8,8 + 0.50 13,7 + 0.75 250 267 + 0.70 4000 6,6 + 0.40 10,9 + 0.60 16,9 + 0.90 300 318 + 0.80 4000 7,8 + 0.45 12,9 + 0.70 20,1 + 1.05 350 370 + 0.90 4000 9,1 + 0.55 15,0 + 0.80 23,4 + 1.20 400 420 + 1.10 4000 10,3 + 0.60 17,0 + 0.90 26,5 + 1.35 450 470 + 1.20 4000 11,5 + 0.65 19,0 + 1,00 29,7 + 1.50 500 520 + 1.30 4000 12,7 + 0.70 21,0 + 1.10 32,8 + 1,65 600 630 + 1.60 4000 15,3 + 0.80 25,4 + 1.30 39,7 + 2.00
